Enclosure Lab / Tool 02
Heat lamp wattage calculator
Tank volume alone cannot tell you the wattage. The distance from the bulb to the basking surface, the room temperature and the species' target decide it. This gives you a starting bulb, a mounting distance and the number to check with a thermometer.
Start with
—
—
- Range
- —
- Mount at
- —
- Or
- —
—
Daytime basking only. Use a ceramic heat emitter or deep heat projector for night heat.
How the wattage is calculated
Heat spreads out as it travels, so distance matters more than the number printed on the box.
Double the distance between the bulb and the basking surface and the same lamp delivers about a quarter of the energy per square centimetre. That is why a 150 W bulb mounted high can read cooler than a 75 W bulb mounted close.
The reference point is a 100 W halogen flood 30 cm above a slate basking surface in a 22 °C room, reading 43 °C on an infrared thermometer. Every other wattage is scaled from that point.
The mesh factor is 1.3 when the lamp sits on a screen top. An open mesh lid loses heat that a solid top keeps, and the screen blocks part of the radiant energy before it reaches the animal. Covering half the screen is usually cheaper than buying a bigger bulb.
Results are a starting wattage, not a set point. Bulb shape, dome depth and surface material move the real number by about ±25%. Run the lamp on a dimming thermostat and confirm the surface temperature with an infrared thermometer.
Why tank volume is not the wattage
Two tanks sold as medium can be 12 cm apart in height, and that changes the answer more than the volume does.
A 40 gallon breeder is 41 cm tall. A 55 gallon is 53 cm. If the basking platform sits at the same height in both, the bulb in the 55 gallon is 12 cm farther from the animal and needs more power for the same surface temperature.
Volume does matter for the warm-side air, not for the basking spot. This page sizes the basking lamp. If the warm side of a large enclosure still reads low once the spot is correct, add a second low-output heat source or insulate the top. Do not keep raising the basking wattage.
Species that bask at 26-32 °C, such as crested geckos and ball pythons, often need less than keepers expect. A crested gecko in a room above 24 °C usually needs no basking lamp at all.
Measure the surface, not the air
A basking animal is heated by the surface it lies on.
Stick-on dials and probe thermometers read air. Hold an infrared thermometer 5-10 cm from the slate or tile and read the spot where the animal actually lies, after the lamp has been on for three hours.
If the surface is over target with the dimmer near its lowest setting, drop one wattage tier, raise the fixture, or lower the platform, in that order. If it is under target with the dimmer at full, go up one tier before you move anything.
Never mount a heat lamp where the animal can touch the bulb. Use a guard, or keep the fixture above a mesh or solid top.
Daytime lamp, night heat separately
Halogen and incandescent bulbs are daytime heaters because they make light.
At night, use a ceramic heat emitter or a deep heat projector on its own thermostat, or let the room cool if the species tolerates it. This calculator covers the daytime basking lamp only.
No coloured night bulbs. If night heat is needed, use a source that makes no visible light.
Starting wattage by tank size
Bearded dragon, 40 °C basking surface, 21 °C room. Generated by the formula above, not typed by hand; a halogen flood in a reflective dome.
| Enclosure | Height (cm) | Top | Halogen | Incandescent |
|---|---|---|---|---|
| 10 gallon | 30 cm | Mesh | 35 W | 50 W |
| 20 gallon long | 30 cm | Mesh | 35 W | 50 W |
| 29 gallon | 46 cm | Mesh | 75 W | 100 W |
| 40 gallon breeder | 41 cm | Mesh | 75 W | 100 W |
| 55 gallon | 53 cm | Mesh | 100 W | 150 W |
| 75 gallon | 53 cm | Mesh | 100 W | 150 W |
| 120 gallon / 4 x 2 x 2 ft | 61 cm | Solid | 100 W | 150 W |
Incandescent equivalents are approximate. A halogen flood does roughly the work of a 1.5 times larger incandescent, which is why the halogen numbers look lower.
Sources and model status
Every number on this page traces back to one of these, or to the formula in section 01.
- Arcadia Reptile, Halogen Infrared Heater: 100 W PAR38 delivers up to 70 °C at 15 in (38 cm) to dark slate.
- Insektenliebe, Arcadia Halogen Heat Lamp listing: at 20-30 cm, 100 W reads 40-46 °C and 75 W reads 36-42 °C.
- Zen Habitats, Bearded Dragon Lighting and Heating Guide: 100 W PAR38 in a 24 in tall enclosure.
- BeardedDragon101, Basking Bulb Wattage Chart: 75-100 W incandescent or about 50 W halogen for a 40 gallon breeder.
- Van Nest and Phillips, Pogona vitticeps lighting v3: flood beam over tight spot, measure the surface after 3+ hours.
- Top Shelf Aquatics, standard aquarium dimensions, for the tank heights in the table.
Status: the model is calibrated from one manufacturer and distributor data set, four wattages at one distance band, and has not been checked against a lab measurement. Treat every result as a starting point for the thermometer, not as a specification.
Questions keepers actually ask
What wattage heat lamp does a bearded dragon need in a 40 gallon?
About 75 W of halogen flood with a mesh top and a 20 cm bulb-to-surface distance in a 21 °C room. The same setup under a solid top lands nearer 50 W. Both are starting points; confirm the surface reads 40 °C.
Is a 100 W bulb too hot for a 40 gallon?
It can be. 100 W at 20 cm over a mesh top predicts about 58 °C on the basking surface, well above a bearded dragon's target. Put it on a dimming thermostat, or step down to 75 W.
Do I need a thermostat with a heat lamp?
Yes. A dimming thermostat caps the surface temperature when the room warms up or the animal parks under the lamp. It also lets a slightly oversized bulb run at 60-70%, which is easier on the filament than switching a bulb on and off.
Halogen or incandescent: do the watts match?
No. A halogen flood delivers roughly the heat of an incandescent one and a half times its wattage. A 75 W halogen is about a 100-150 W incandescent spot.
Why is my basking spot cold with a 150 W bulb?
Distance, mesh and dome. At 40 cm a 150 W bulb delivers less per area than a 75 W bulb at 20 cm. Raise the platform to 20-30 cm below the fixture, use a reflective dome, and cover part of a mesh top before buying a bigger bulb.
Can I use this calculator for a crested gecko or leopard gecko?
Yes, but their targets are lower: 26 °C and 32 °C. Most of their tanks come out at 20-35 W, and in a room above 24 °C a crested gecko usually needs no basking lamp at all.